MILLING
NPA 20/2018 INCH
Front and Back Chamfer Milling Tools
Highlights
New CHAMFMILL tools for front and back chamfering, carrying PNMT 06 pentagonal inserts with five cutting edges for front chamfering and five for back chamfering.
ISCAR is introducing the CHAMFMILL family of indexable milling cutters for front and back chamfering.
The new cutters carry star-shaped (pentagonal) double-sided inserts with 10 cutting edges - 5 intended for front chamfering and 5 for back chamfering.
The main applications of the new tools include machining outer and inner small chamfer widths and removing burrs.
Insert Features
- 5 cutting edges for front chamfering
- 5 cutting edges for back chamfering
- Produced from the advantageous IC830 ISCAR’s SUMO TEC carbide grade
- Maximum width of machined 45° chamfer is .060”
Tool Features
- Two shank configurations are available:
- Cylindrical shank
- Replaceable milling heads with MULTI-MASTER adaptation
- Available in .458, .655 and .734 inch tool diameters
- Suitable for back milling chamfers in.394” minimum diameter holes
- Polish coating to ensure better chip flow and tool protection from
corrosion and wear
Applications
- Machining main engineering materials: steel (ISO P), stainless steel (ISO M) and cast iron (ISO K)
- Front chamfering, back chamfering, eliminating hand de-burring
Benefits
- Economical: inserts with 5 front and 5 back cutting edges
- Productive machining due to high cutting speed
Recommended cutting conditions
Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
* ISCAR material group in accordance with VDI 3323 standard
** Quenched and tempered
1. The table provides reference cutting conditions, it should be adjusted according to the condition of the machine tool and workpiece
2. Wet cutting is recommended to obtain good surface quality.
3. In case built-up edge occurs during cutting stainless steel, use soluble oil.
CH45-PN06
Upper and Bottom Chamfering Endmills Carrying Pentagonal Inserts
(1) Number of inserts
(2) Minimum penetration diameter for back chamfering
(3) Item weight
CH45-MM-PN06
Upper and Bottom Chamfering Endmills with MULTI-MASTER Threaded Adaptation
• Do not apply lubricant to the MULTI-M ASTER threaded connection
(1) Number of inserts
(2) Key flat size
(3) Minimum penetration diameter for back chamfering
(4) Item weightt
PNMT 0602-TN
Pentagonal Inserts for Upper and Bottom Chamfering
The NPA20-inch-2018's pdf file:
View (PDF) or
Download (ZIP)
